Hardware Installation And Configuration; New Installation; Power Cables - Sun Microsystems StorEdge D2 Array Best Practices Manual

Hide thumbs Also See for StorEdge D2 Array:

Table of Contents

C H A P T E R

Hardware Installation and

Configuration

This chapter provides some additional information, guidelines, and tips relating to

the installation and configuration of Sun StorEdge D2 hardware.

This chapter contains the following sections:

Section 2.1, "New Installation" on page 2-1

Section 2.2, "Cluster and Multi-Initiator Configurations" on page 2-2

Section 2.3, "Supported Configurations" on page 2-3

2.1

Note – Refer to the Sun StorEdge D2 Array Installation, Operation, and Service Manual

for detailed instructions and information on installing an array.

This section contains the following topics:

Section 2.1.1, "Power Cables" on page 2-1

Section 2.1.2, "SCSI Cables" on page 2-2

2.1.1

For information and guidelines for connecting the AC power cables, refer to the Sun

StorEdge D2 Installation, Operations, and Service Manual. It is important that you

follow the guidelines in this document.

2-1

Table of Contents

Need help?

Do you have a question about the StorEdge D2 Array and is the answer not in the manual?