Figure 2-1 Expansion Unit Back Panel; Figure 2-2 Connecting The Sun Storedge 5210 Nas Ac Power Cables - Sun Microsystems Sun StorEdge 5210 NAS Quick Reference Manual

2. Connect both AC power cables to the back of each expansion unit.
AC Power Cord/Plug 2
FIGURE 2-1
3. Connect the other end of the power cables to an AC power source.
4. For each expansion unit turn on the two power supply switches.
5. Connect one end of the AC power cable to the Sun StorEdge 5210 NAS
(Figure 2-2).
FIGURE 2-2
Note – To connect two expansion units, the NAS server must have two RAID cards
installed.
6. Repeat for the second cable.
7. Plug both power cables into an AC power source.
Caution – Both power cables must be connected before you turn on the power
switch.
6 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
Power Supply 2 Switch
Expansion Unit Back Panel
RJ-45
Network Cables
Connecting the Sun StorEdge 5210 NAS AC Power Cables
SCSI Cable to
NAS Filer Head
SCSI Cable to optional
Expansion Unit
Power Supply 1 Switch
AC Power Cord/Plug 1
AC Power Cords/Plugs