Connecting The Library To Ac Power - Sun Microsystems storedge L25 Installation Manual

Connecting the Library to AC Power

L25 Power
Requirements
Figure 23 Power Inlet
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
This section explains how to connect the library to AC power.
To connect the L25 library to AC power:
0
Referring to
1
your library configuration and input voltage.
Warning:
Connect the power cable (provided in the accessories kit) to the
2
power inlet on the back of the library (see
distribution unit.
Power inlet
Connecting the Library to AC Power
table 4, select appropriate AC distribution unit(s) for
AC distribution units (power strips) must be certified
for safety by an agency acceptable to the country of
use. For use in the United States and Canada,
distribution units must be UL listed and CSA
certified. For use in Europe, distribution units must
be CE marked. National certifications for other
countries depend on local requirements.
Document 6423015-01, Ver. 1, Rel. 0
figure 23) and to the AC
June 2002
0
29