Security - Supermicro X12DPFR-AN6 User Manual

4.6 Security

This menu allows the user to configure the following security settings for the system.
Administrator Password
This feature indicates if an administrator password has been installed. It also allows the user
to set the administrator password which is required to enter the BIOS setup utility. The length
of the password should be 3 to 20 characters.
User Password (Available when an Administrator Password is entered)
This feature indicates if a user's password has been installed. It also allows the user to set
the user's password which is required to enter the BIOS setup utility. This feature provides the
description of the user's password. The length of the password should be 3 to 20 characters.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password bootup and upon entering the BIOS Setup utility. The options are
Setup and Always.
Hard Drive Security Frozen
Select Enabled to freeze the Lock Security feature for HDD to protect key data in hard drives
from being altered. The options are Enabled and Disabled.
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: http://www.supermicro.com/support/manuals/.
115
Chapter 4: UEFI BIOS