Supermicro X12DPFR-AN6 User Manual page 96

Super X12DPFR-AN6 User's Manual
 Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable Serial Port 2. The options are Enabled and Disabled.
Device Settings (Available when "Serial Port 2" is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of Serial
Port 2.
Change Settings (Available when "Serial Port 2" is set to Enabled)
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 2. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to
Serial Port 2. The options for SOL are Auto, (IO=3F8h; IRQ=3), (IO=2F8h; IRQ=3), (IO=3E8h;
IRQ=3), and (IO=2E8h; IRQ=3).
Serial Port 2 Attribute
Select SOL to use Serial Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are COM and SOL.
96