Security - Supermicro H12SSW-iNL User Manual

H12SSW-iNL/NTL Motherboard User's Manual

4.6 Security

This tab allows you to configure the following security settings for the system.
Administrator Password
Press the <Enter> key to create a new, or change an existing Administrator password. Note
that if the Administrator Password is erased, the User Password will be cleared as well.
User Password
Press the <Enter> key to create a new, or change an existing User password.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
82