Supermicro X12DPFR-AN6 User Manual page 106

Super X12DPFR-AN6 User's Manual
HTTP Boot Configuration
This submenue allows the user to configure HTTP Boot settings. When you select this
submenu and press <Enter>, the following features will display:
HTTP Boot Configuration
HTTP Boot Policy
Use this feature to set the HTTP Boot policy. The options are Apply to all LANs, Apply to
Each LAN, and Boot Priority #1 instantly.
Priority of HTTP Boot
Instance of Priority 1:
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. Select IPv4 to
boot the target LAN from IPv4. The options are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be sure to enter a boot description; otherwise, the boot option for the URI cannot be created.
Boot URI (Uniform Research Identifier)
Enter a Boot URI with 128 characters or shorter. This Boot URI determines how IPv4 Boot
Option & IPv6 Boot Option will be created. This feature is only supported on Dual or EFI
Boot Mode.
Instance of Priority 2:
This feature sets the rank target port. The default setting is 0.
106