Supermicro X12DPFR-AN6 User Manual page 33

Chapter 2: Installation
Removing the Processor Carrier Assembly from the Processor
Heatsink Module (PHM)
To remove the processor carrier assembly from the PHM, please follow the steps below:
1. Detach four plastic clips (marked a, b, c, d) on the processor carrier assembly from the
four corners of heatsink (marked A, B, C, D) in the drawings below.
Processor Carrier Assembly
d
(Reverse Side View)
Pin1
Pin1
b
a
D
c
A
B
C
Heatsink
(Reverse Side View)
2. When all plastic clips are detached from the heatsink, remove the processor carrier
assembly from the heatsink
33