Security - Supermicro X13DGU User Manual

Super X13DGU User's Manual

4.6 Security

This feature allows you to configure the following security settings for the system.
Disable Block Sid (Available when your storage devices support TCG)
Select Enabled to allow SID authentication of TCG Storage device. The options are Disabled
and Enabled.
The following information is displayed:
•
Administrator Password
•
User Password
•
Password Description
Administrator Password
This feature indicates if an administrator password has been installed. It also allows you to
set the administrator password which is required to enter the BIOS Setup utility. The length
of the password should be from three characters to 20 characters long.
User Password (Available when "Administrator Password" has been set)
This feature indicates if a user password has been installed. It also allows you to set the user
password which is required to enter the BIOS Setup utility. The length of the password should
be from three characters to 20 characters long.
Note: For more information on Security Boot configuration and Secure Erase instruc-
tions, please refer to Security Boot Configuration User's Guide and Secure Erase In-
structions User's Guide posted on the web page under the link:
com/support/manuals/.
160
https://www.supermicro.