Event Logs - Supermicro X12DPFR-AN6 User Manual

Super X12DPFR-AN6 User's Manual

4.4 Event Logs

Use this feature to configure the Event Log settings.
Note: After you've made any changes on a setting below, please reboot the system
for the changes to take effect.
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during
system boot. The options are Enabled and Disabled.
Erasing Settings
Erase Event Log
Select "No" to keep the event log without erasing it upon next system bootup. Select "Yes,
Next Reset" to erase the event log upon next system reboot. The options are "No", "Yes,
Next Reset", and "Yes, Every Reset".
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when
the event log is full. Select Do Nothing for the system to do nothing when the SMBIOS
event log is full. The options are Do Nothing and Erase Immediately.
110