Supermicro X12DPFR-AN6 User Manual page 48

Super X12DPFR-AN6 User's Manual
VROC RAID Key Header
A VROC RAID Key (RAID_KEY) header is located at JRK1 on the motherboard. Install a
VROC RAID Key on JRK1 for NVMe RAID support as shown in the illustration below. Please
refer to the layout below for the location of JRK1.
Note: For detailed instructions on how to configure VROC RAID settings, please refer
to the VROC RAID Configuration User's Guide posted on the web page under the link:
http://www.supermicro.com/manuals/other/TPM.pdf..
Intel RAID Key
Pin Definitions
Pin# Definition
1 Ground
2 3.3V Standby
3 Ground
4 PCH RAID Key
Note: The graphics contained in this user's manual are for illustration only. The compo-
nents installed in your system may or may not look exactly the same as the graphics
shown in the manual.
JVGA1
VGA
USB0/1 IPMI_LAN
(3.0)
BMC
BIOS
1
BMC FW
BATTERY
AIOM:CPU1 PCI-E 4.0 X16
BT1
PCH
JBT1
CMOS CLEAR
X12DPFR-AN6
REV:1.01
JS1
JS2
CPU1
BAR CODE
CPU2
5
JPWR1 JPWR2
1. VROC RAID Key (JRK1)
48
VROC Key
VROC Key Header (JRK1)