Supermicro X12DPFR-AN6 User Manual page 12

Super X12DPFR-AN6 User's Manual
Motherboard Features
CPU
•
Supports the 3rd Gen Intel Xeon Scalable Processors (in Socket P+ LGA 4189)
Note: The runtime CPU core counts and maximum CPU TDP (Thermal Design Power) support are dependent on
system configurations.
Memory
•
Supports up to 2TB 3DS DDR4 (288-pin) ECC memory with speeds of 3200/2933/2666 MHz 3DS LRDIMM/LRDIMM/3DS
RDIMM/RDIMM and Intel® Optane™ PMem 200 Series memory with speeds up to 3200 MHz in 16 memory slots
Note: Intel® Optane™ PMem 200 Series memory is supported by the 3rd Gen Intel Xeon Scalable (83xx/63xx/53xx/4314
Series) Processors only.
DIMM Size
•
Up to 128 GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel PCH C621A (LBG-R)
Expansion Slots
•
Two PCI-Express 4.0 x16 slots (CPU1 JSXB1/CPU1 JAIOM1)
•
One PCI-Express 4.0 x8 slot for M.2 or SAS controllers (CPU1 JSXB2)
•
Three PCI-Express 4.0 x8 NVME SlimSAS Ports (JNVME1/2/3)
Network
•
One 1G dedicated BMC LAN located on the rear I/O panel (via AST2600 BMC)
Baseboard Management Controller (BMC)
•
ASPEED AST2600 BMC
Graphics
•
Graphics controller & VGA support via ASPEED AST2600 BMC
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
Video (VGA) Connection
Peripheral Devices
•
Two USB 3.0 ports on the rear I/O panel (USB0/1)
BIOS
•
AMI BIOS
•
ACPI 3.0 or later, PCI firmware 4.0 support, BIOS rescue hot-key, SPI dual/quad speed support, riser card auto detection
support, RTC (Real Time Clock) wakeup, and SMBIOS 3.0 or later
Motherboard Features
•
One serial port on the rear I/O panel (JCOM1)
•
Eight SATA 3.0 ports at 6 Gb/s (SATA0~3, 4~7)
•
One VGA port on the rear I/O panel (JVGA1)
12
http://www.supermicro.com/products/