Bmc - Supermicro X12DPFR-AN6 User Manual

Super X12DPFR-AN6 User's Manual

4.5 BMC

Use this feature to configure Intelligent Platform Management Interface (BMC) settings.
When you select this submenu and press <Enter>, the following information will display:
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are
Enabled and Disabled.
Erasing Settings
Erase SEL
Select "Yes, On next reset" to erase all system event logs upon next system boot. Select
"Yes, On every reset" to erase all system event logs upon each system reboot. Select "No"
to keep all system event logs after each system reboot. The options are "No", "Yes, On
next reset", and "Yes, On every reset".
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are Do Nothing and Erase Immediately.
112