Checking Ink Levels; Transporting Your Product; Solving Network Problems - Epson ET-3700 Quick Manual

Checking Ink Levels

You can visually check the ink levels in the product's ink
tanks. Make sure the ink levels are above the lower ink refill
lines on the ink tanks. If ink levels fall below these lines, see
the online User's Guide for refilling instructions.
Note: You may also see a message displayed on your
computer screen when an ink tank is low or needs to be
refilled.
Your product has a low ink alert system. The accuracy of
this system depends on the user refilling the ink tanks
correctly. The product cannot directly measure the ink levels in the tanks, instead it
estimates the amount of ink remaining by internally monitoring ink usage. The low ink
alert system may generate inaccurate messages if the ink tanks are not refilled
according to the instructions in the online User's Guide.
Caution: Perform regular visual inspections of the ink tanks to ensure ink levels do not
fall below the lower line. Prolonged use of the product when the ink level is below the
lower line on the tank could damage the product.

Transporting Your Product

If you need to transport or ship your product, see the online User's Guide for important
handling instructions.
Note: Make sure the ink tank caps are closed securely. Avoid tilting the product, placing it
vertically, or turning it upside down; otherwise, ink may leak. Do not put opened ink
bottles in the box with the printer.

Solving Network Problems

If you have a network problem with your product, check the messages on the LCD screen
to diagnose the cause of most problems.
You can also check the basic troubleshooting suggestions below. For more in-depth
troubleshooting, see your online User's Guide or FAQs at
(U.S.) or
www.epson.ca/support
■
Try connecting to the wireless router or access point with your computer or another
device to confirm that it is working correctly.
■
The product can only connect to networks that support 2.4 GHz connections. If your
router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.
■
Try restarting the router (turn it off and then on), then try to connect to it again.
4
Checking Ink Levels
(Canada).
www.epson.com/support