Set Ieee 802.1X; User And Account; Set User Account And Permission - HIKVISION DS-2TD8166-150ZH2F/V2 User Manual

Thermal & optical bi-spectrum ptz network camera
Table of Contents

Advertisement

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. You need to set the same value in router while configuration.
3. Click Save.

14.14.7 Set IEEE 802.1X

You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Configuration → Network → Advanced Settings → 802.1X, and enable the function.
Select protocol and version according to router information. User name and password of server
are required.

14.15 User and Account

14.15.1 Set User Account and Permission

The administrator can add, modify, or delete other accounts, and grant different permission to
different user levels.
Caution
To increase security of using the device on the network, please change the password of your
account regularly. Changing the password every 3 months is recommended. If the device is used in
high-risk environment, it is recommended that the password should be changed every month or
week.
Steps
1. Go to Configuration → System → User Management → User Management.
2. Click Add. Enter User Name, select Level, and enter Password. Assign remote permission to
users based on needs.
Administrator
The administrator has the authority to all operations and can add users and operators and
assign permission.
User
Users can be assigned permission of viewing live video, setting PTZ parameters, and changing
their own passwords, but no permission for other operations.
Operator
91

Advertisement

Table of Contents
loading

Table of Contents