Set Ssh; Set Https - HIKVISION DS-2TD8166-150ZH2F/V2 User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
the visits from the certain IP addresses.
IP address refers to IPv4.
Steps
1. Go to Configuration → System → Security → IP Address Filter.
2. Check Enable IP Address Filter.
3. Select the type of IP address filter.
Forbidden
Allowed
4. Edit the IP address filter list.
Add
Modify
Delete
5. Click Save.

14.14.4 Set SSH

SSH is a protocol to ensure security of remote login. This setting is reserved for professional
maintenance personnel only.
Steps
1. Go to Configuration → System → Security → Security Service.
2. Check Enable SSH.
3. Click Save.

14.14.5 Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable.
3. Click Delete to recreate and install certificate.
Create and install
self-signed certificate
Create certificate
request and install
IP addresses in the list cannot access the device.
Only IP addresses in the list can access the device.
Add a new IP address to the list.
Modify the selected IP address in the list.
Delete the selected IP address in the list.
Refer to Create and Install Self-signed Certificate
Refer to Install Authorized Certificate
89