Set One-Touch Patrol - HIKVISION DS-2TD8166-150ZH2F/V2 User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Time
It is the duration staying on one patrol point.
Note
A patrol can be configured with 32 presets at most, and 2 presets at least.
4. Click OK to finish a patrol setting.
5. Repeat the steps above to configure multiple patrols.
6. Operate patrols.
Note
You can delete all patrols in Configuration → PTZ → Clear Config. Click Clear All Patrols, and
click Save.

9.3.1 Set One-Touch Patrol

The device automatically adds presets to one patrol path and starts patrol scan.
Steps
1. Set two or more presets among preset No.1 to preset No.32. For setting presets, refer to Set
Preset.
The device will automatically add presets to patrol path No.8.
2. Choose one of the following methods to enable the function.
– Click .
– Call patrol path No.8.
Select and call preset No.45.
Delete the presets in patrol.
Adjust the preset order.
Call the patrol.
Stop patroling.
Delete the patrol.
Set the patrol.
40