Table of Contents
Advertisement
28 | DX-D 400 | Introduction to DX-D 400
Connectivity
On configurations with X-ray exposure parameter control on the NX
workstation, the NX workstation is connected to the X-ray system to exchange
X-ray exposure parameters.
The NX workstation requires a 100 Mbit ethernet network to exchange
information with a number of other devices.
The NX workstation communicates with other devices in the hospital network
using one of the following protocols:
• DICOM
• IHE
The NX workstation can be connected to a RIS system (input scheduling), a
PACS system (output image/data management) and to a hardcopy device
(output image).
Related Links
Configuration
0230D EN 20191209 1135
Note: The connections between the components of the system
should not be disconnected or modified.
on page 12
Advertisement
Table of Contents
