Installing The System Information Display (Sc-Mt800) - Shimano ALFINE S7051 Series Dealer's Manual

INSTALLATION

Installing the system information display (SC-MT800)

„ Installing the system information display (SC-MT800)
Replacing the clamp band
(A)
Remove the case mounting bolt with a
2.5 mm hexagon wrench and replace the
clamp band.
(B)
36
(A)
Case mounting bolt
(B)
Clamp band
Tightening torque
0.6 N·m
NOTICE
If using a handlebar with a thick diameter,
reinstall it using the included Ø35 mm clamp
band.