Shimano ALFINE S7051 Series Dealer's Manual page 14

TO ENSURE SAFETY
„EW-SD50
• When connecting the EW-SD50, use the method indicated in the figure. When connecting, push it straight in until you feel it click into place.
TL-EW02
• When disconnecting the EW-SD50, lift the TL-EW02 straight up as indicated in (A), or use the TL-EW02 as a lever as indicated in (B).
„EW-SD300
• When connecting or disconnecting the EW-SD300, use the method indicated in the figure. When connecting, push it straight in until you feel it click
into place.
Plug
TL-EW300
• When connecting the EW-SD300, the method below can also be used.
• When disconnecting the EW-SD300, the method below can also be used. Lift the TL-EW300 straight up as indicated in (A), or use the TL-EW300 as a
lever as indicated in (B).
„Electric wire cover/cord cover
• If the electric wire cover/cord cover is deformed, the adhesive may weaken. To avoid deformation, store away from direct sunlight and hot and humid
places.
• If there is dirt or oil on the frame, or if the surface is rough, the adhesive may weaken.
• Depending on the frame paint finish, the adhesive may weaken.
• The adhesive will strengthen 2 to 3 days after affixing the electric wire cover/cord cover.
Plug
E-TUBE port
(A)
(B)
E-TUBE port
(A)
(B)
14