To Ensure Safety - Shimano ALFINE S7051 Series Dealer's Manual

TO ENSURE SAFETY

TO ENSURE SAFETY
Be sure to also inform users of the following:
Be sure to observe the following instructions in order to avoid burns or other injury from fluid leakage, overheating, fire, or explosion.
„Lithium ion battery
• Use the designated charger to charge the battery. If any non-specified items are used, fire, overheating or leakage may occur.
• Do not heat the battery or throw it into fire. If this is not observed, fire or bursting may occur.
• Do not deform, modify, disassemble or apply solder directly to the battery. Do not leave the battery in places which may exceed 60 °C in temperature,
such as places which are exposed to direct sunlight inside vehicles on hot days or near stoves. If this is not observed, leakages, overheating or bursting
may cause fire, burns, or other injuries.
• Do not connect the (+) and (-) terminals with metallic objects. Do not carry or store the battery together with metallic objects such as necklaces or
hairpins. If this is not observed, short-circuits, overheating, burns or other injury may occur.
• If any liquid leaking from the battery gets into the eyes, immediately wash the affected area with clean water without rubbing the eyes, and then
seek medical attention.
„Battery charger/Battery charger cord
• Do not get the charger wet or use it while it is wet, and do not touch or hold it with wet hands. If this is not observed, problems with operation or
electric shocks may occur.
• Do not cover the charger with cloths while it is in use. If this is not observed, heat may build up and the case may become deformed, or fire or
overheating may occur.
• Do not disassemble or modify the charger. If this is not observed, electric shocks or injury may occur.
• Use the charger at the specified power supply voltage only. If a power supply voltage other than that specified is used, fire, explosions, smoke,
overheating, electric shocks or burns may occur.
• Do not touch metallic parts of the charger or the AC adapter if there is a lighting storm. If lightning strikes, electric shocks may occur.
SM-BCR2: Battery charger for SM-BTR2 / BT-DN110 / BT-DN110-A
SM-BTR2 / BT-DN110 / BT-DN110-A: Lithium ion battery (built-in type)
• Use an AC adapter with a USB port with a voltage of 5.0 Vdc and with a current equal to or higher than 1.0 Adc. If the one with a current lower than
1.0 A is used, the AC adapter may heat up, potentially causing a fire, smoke, overheating, destruction, electric shock, or burns.
DANGER
5