INSTALLATION
Installation of the dual control lever: Drop handlebar (ST-S705-R / BL-S705-L)
Installation of the dual control lever:
Drop handlebar (ST-S705-R / BL-S705-L)
When using a model not indicated here, refer to the dual control lever dealer's manual.
(A)
Installation of the brake cable
Cable used
Inner cable
Ø1.6 mm
Pull back the bracket cover from the
front and use a 5 mm hexagon wrench
to tighten the fixing nut.
(B)
SLR outer casing
Ø5 mm
38
(A)
Bracket cover
(B)
5 mm hexagon wrench
Tightening torque
6 - 8 N·m
NOTICE
Even with the recommended tightening
torque, there is a possibility that the carbon
handlebars may become damaged and
insufficiently tightened. For the appropriate
torque value, consult with the manufacturer
of the completed bicycle or the manufacturer
of the handle.
TECH TIPS
Use cables which are long enough so that
they still have some slack even when the
handlebars are turned as far as they will go to
the left and to the right.