Shimano ALFINE S7051 Series Dealer's Manual page 64

OPERATION
Displaying and operating the system information display (SC-MT800)
Operation mode
(C)
Display
Adjustment of the motor unit
The motor unit can be adjusted in this mode.
Adjustment can be performed 4 increments in the + direction and 4
decrements in the – direction; a total adjustment range of 8 values.
Adjustment values can be changed using the dual control lever or shifting
switches.
Manual shift
Gears are shifted manually in this mode.
How to operate
Details
(x) (y)
(z)
64
(C)
Operation mode
CAUTION
•
Improper adjustment may cause gear
engagement skipping, resulting in an
accidental fall.
•
Perform adjustment only when you have
an unusual feel during shifting. If there is
no problem with shifting, unnecessary
adjustment may worsen shifting
performance.
Single click (2 seconds)
Single click (0.5 seconds)
Pressing and holding down
(5 seconds or more)
(x)
Shift mode
(y)
Adjustment mode
(z)
RD Protection Reset mode
(RD Protection Reset cannot be
used.)
NOTICE
RD Protection Reset mode can be selected,
however, RD Protection Reset cannot be
performed.
The function is operable on rear derailleurs
(Di2) only.
For details on RD Protection, refer to the
user's manual of a supported model.