INSTALLATION
Installing the system information display (SC-MT800)
Installing to the handlebar
(A)
1
2
Insert the clamp band of the system
information display into the handlebar.
(B)
Adjust the angle of the system
information display so that it is easy to
see, and then use a 3 mm hexagon
wrench to tighten the clamp bolt.
(A)
37
(A)
Clamp band
(B)
System information display
(A)
Clamp bolt
Tightening torque
0.8 N·m
NOTICE
Recommended installation angle (angle of
screen): 15° to 35° to the horizontal
35°
15°