Shimano ALFINE S7051 Series Dealer's Manual page 67

OPERATION
About wireless functions (SC-MT800)
This completes the connection process.
3
E-TUBE PROJECT connection
Before setting up a connection, turn on Bluetooth
1
Open E-TUBE PROJECT Cyclist and set it to listen for Bluetooth
Press the mode switch until "C" appears on the display.
2
The unit on the bicycle will begin signal transmission. The unit name displays in E-TUBE PROJECT
Cyclist.
(Release the mode switch or button as soon as the unit on the bicycle begins signal
transmission. If the mode switch or button is held down for any longer, a different mode will
be activated.)
Select the unit name displayed on screen.
3
LE on the smartphone.
®
LE signals.
®
67
TECH TIPS
•
Check on the cycle computer to see if
connection was successful.
•
If a connection cannot be made in the way
described above, refer to the manual for
your cycle computer.
•
For information on how to show gear
position or the Di2 battery level, refer to
the manual for the cycle computer.
TECH TIPS
When disconnecting, cancel the Bluetooth
connection from the smartphone. (The bicycle
will switch from the connection mode to the
normal operation mode.)
LE
®