Tenda N300 Wi-Fi xPON ONT User Manual page 44

Parameter description
Parameter
UserName
Password
Type
AC-Name
Service-Name
6rd configuration
When you want to access a certain IPv6 network or service of your service provider through an
IPv4 network and you are provided with related parameters, you can set up a 6rd connection.
When Channel Mode is set to 6rd, these parameters are required.
Description
They specify the PPPoE user name and password for settings up the WAN connection.
It specifies the PPPoE connection type.
Continuous: The ONT keeps connected to the internet.
⚫
Connect on Demand: The ONT disconnects from the internet after a certain period
⚫
and establishes the connection as soon as you attempt to access the internet.
⚫ Manual: Users should manually connect and disconnect the network connection.
It specifies the PPPoE server name, for the ONT to verify the legitimacy of the PPPoE
server.
If your ISP did not provide a service name, leave this field blank. Otherwise, a dial failure
may occur.
It specifies the PPPoE service name used by the PPPoE server to verify the legitimacy of
the ONT.
If your ISP did not provide a service name, leave this field blank. Otherwise, a dial failure
may occur.
36
WAN