Tenda N300 Wi-Fi xPON ONT User Manual page 60

The information of the registered
DDNS service:
−
Service provider: DynDNS.org
−
User name: JohnDoe
−
Password: JohnDoe123456
−
Domain name:
o2849z7222.zicp.vip
Configuring procedure:
Step 1 Log in to the web UI of the ONT.
Step 2 Add a Dynamic DNS rule.
Choose Services > Service > Dynamic DNS.
1.
Select Enable.
2.
Choose a service provider in DDNS Provider, which is DynDNS.org in this example.
3.
Enter the Hostname, which is o2849z7222.zicp.vip in this example.
4.
Select the WAN interface that the port forwarding rule applies to.
5.
Enter the user name and password in the DynDns Settings part, which are JohnDoe and
6.
JohnDoe123456 in this example.
Click Add.
7.
Step 3 Configure the port forwarding function (refer to
---End
After the configuration, users from the internet can access the FTP server by visiting "Intranet
service application layer protocol name://Domain name". If the remote port number is not the
same as the default intranet service port number, the accessing address should be: "Intranet
service application layer protocol name://Domain name:Remote port number".
port forwarding).
52
Services
FTP server
Service port: 21
IP address: 192.168.1.136
IP address:
192.168.0.136