Parameter
Description
It specifies the wireless band and protocol of the Wi-Fi network.
2.4 GHz (B): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11b
⚫
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 11 Mbps.
2.4 GHz (G): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11g
⚫
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 54 Mbps.
2.4 GHz (B+G): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11b
⚫
Band
or IEEE 802.11g protocol can connect to the 2.4 GHz wireless network of the ONT.
2.4 GHz (N): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11n
⚫
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 300 Mbps.
2.4 GHz (G+N): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11g
⚫
or IEEE 802.11n protocol can connect to the 2.4 GHz wireless network of the ONT.
2.4 GHz (B+G+N): In this mode, the 2.4 GHz wireless devices compliant with IEEE
⚫
802.11b, IEEE 802.11g or IEEE 802.11n protocol can connect to the 2.4 GHz wireless
network of the ONT.
It specifies the wireless operation mode of the ONT.
Mode
AP: The ONT serving as a wireless access point provides a wireless network for wireless
clients.
You can click Multiple AP to create more wireless networks of the same band.
No.: It specifies the No. of the AP Wi-Fi network.
⚫
Enable: It specifies whether to enable the AP Wi-Fi network.
⚫
Band: It specifies the wireless band and protocol of the AP Wi-Fi network.
⚫
SSID: It specifies the Wi-Fi name of the AP Wi-Fi network.
⚫
Multiple AP
Broadcast SSID: It specifies whether to hide the SSID of the AP Wi-Fi network. Enabled
⚫
means that the SSID is displayed. Disabled means that the SSID is hidden, and you need
to enter the SSID of the Wi-Fi network manually to connect to it.
Active Client List: You can click it to view the information of clients connected to the
⚫
Wi-Fi network.
Reset: You can click it to discard the unsaved modifications on this page.
⚫
SSID
It specifies the Wi-Fi name of the main Wi-Fi network.
It specifies the bandwidth of the wireless channel of the Wi-Fi network.
20MHz: It indicates that the channel bandwidth used by the ONT is 20 MHz.
⚫
Channel Width
40MHz: It indicates that the channel bandwidth used by the ONT is 40 MHz.
⚫
20/40MHz: It specifies that the ONT can switch its channel bandwidth between 20 MHz
⚫
and 40 MHz based on the ambient environment.
It specifies the channel in which the Wi-Fi network works.
You are recommended to choose a channel with less interference for better wireless
transmission efficiency. You can use a third-party tool to scan the Wi-Fi signals nearby to
Channel Number
understand the channel usage situations.
Auto: It indicates that the ONT automatically adjusts its operating channel according to
⚫
the ambient environment.
14
WLAN