Pon Status - Tenda N300 Wi-Fi xPON ONT User Manual

3.3

PON status

On this page, you can view the PON status and GPON/EPON connection status of the ONT.
To access the page, log in to the web UI of the ONT and choose Status > PON.
Parameter description
Parameter
Vendor Name
Temperature
Voltage
PON Status
Tx Power
Rx Power
Bias Current
GPON Status ONU State
EPON Status Auth state
Description
It specifies the vendor name of the ONT.
It specifies the current chip temperature of the ONT.
It specifies the current voltage of the optical module of the ONT.
It specifies the transmitted and received optical power of the ONT over the
PON port.
It specifies the current bias current of the optical module of the ONT.
It specifies the state of the ONT, ranging from O1 to O7.
O1 to O4: The ONT is registering.
⚫
O5: The ONT registered successfully and is under normal operation.
⚫
O6/O7: The ONT is in abnormal state and stops transmitting signals.
⚫
It specifies the state of the ONT.
11
Status