Tenda N300 Wi-Fi xPON ONT User Manual page 76

Choose Services > Service > DHCP.
1.
Click MAC-Based Management.
2.
Enter the MAC Address of the host of the server, which is D4-61-DA-1B-CD-89 in this
3.
example.
Enter the assigned IP Address for the server host, which is 192.168.1.136 in this example.
4.
Click Assign IP.
5.
---End
After the configuration, users from the internet can access the FTP server by visiting "Intranet
service application layer protocol name://WAN IP address of the ONT". If the intranet service port
number is not the default number, the accessing address should be: "Intranet service application
layer protocol name://WAN IP address of the ONT:Intranet service port number".
If the default intranet service port number is 80, please change the service port number to an
uncommon one (1024–65535), such as 9999.
In this example, the address is "ftp://102.33.66.88". You can find the WAN IP address of the ONT in
Device status.
To access the FTP server from the internet:
Open the file explorer on a computer that can access the internet, and visit ftp://102.33.66.88.
Enter the user name and password to access the resources on the FTP server.
68
Services