Step 6
(Optional) Configure Port Mapping as required.
Step 7
Click Apply Changes.
---End
After the configuration, you can access the internet through the LAN ports or Wi-Fi networks of the
ONT, or by connecting a router (connection type: DHCP/dynamic IP) to a LAN port of the ONT.
6.3.2
Set up a dynamic IP connection
If your ISP does not provide any parameters, you can try to set up a DHCP connection.
Configuring procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Choose WAN > PON WAN.
Step 3
Set Channel Mode to IPoE.
42
WAN