Tenda N300 Wi-Fi xPON ONT User Manual page 41

Parameter
Channel Mode
Enable Bridge
Admin Status
Connection Type
MTU
Enable IGMP-Proxy
Enable MLD-Proxy
IP Protocol
WAN IP settings
You can configure the WAN IPv4 address information in this part.
This part needs to be configured only when Channel Mode is set to IPoE and IP Protocol is set to
IPv4 or IPv4/IPv6 or when Channel Mode is set to 6rd.
Description
It specifies the mode that you used to set up the WAN connection, including Bridged,
IPoE, PPPoE and 6rd.
Bridged: Select this type when this device only serves as a modem, and you want to
⚫
set up a dial-up connection or enter other internet parameters directly on your
computer for internet access.
IPoE: Select DHCP if your ISP does not provide any parameters to you for internet
⚫
access, and select Fixed IP if your ISP provides a static IP address and other related
information to you for internet access.
PPPoE: Select this type if your ISP provides a user name and password to you for
⚫
internet access.
6rd: Select this type when you want to deploy the IPv6 network rapidly based on
⚫
IPv4 infrastructures.
It specifies whether to enable the bridge function.
It specifies whether to enable this WAN connection.
It specifies the WAN connection type. Choose the proper connection type as required
by your ISP.
Other
⚫
TR069
⚫
INTERNET
⚫
INTERNET_TR069
⚫
Maximum Transmission Unit (MTU) is the largest data packet transmitted by a network
device. When the channel mode is PPPoE, the default MTU value is 1492. When the
channel mode is IPoE, the default MTU value is 1500. Do not change the value unless
necessary.
It specifies whether to enable the Internet Group Management Protocol (IGMP) Proxy.
If you are not sure, keep the default setting or consult your ISP.
IGMP Proxy is used to manage multicast data and reduce traffic replication. IGMP
proxy enables a device to issue IGMP host messages on behalf of its users, reducing
IGMP messages and the load for the uplink device.
It specifies whether to enable the Multicast Listener Discovery (MLD) Proxy. If you are
not sure, keep the default setting or consult your ISP.
MLD is the IPv6 equivalent of IGMP.
It specifies the adopted IP protocol version.
IPv4: Select this option if IPv4 is used for communication.
⚫
IPv6: Select this option if IPv6 is used for communication.
⚫
IPv4/IPv6: Select this option if both IPv4 and IPv6 are used for communication.
⚫
33
WAN