Table of Contents
Advertisement
•
Safety footwear
Material:
•
Damp cloth
The component surfaces of the system must be cleaned prior to every function check of the sys-
tem (weekly) in order to, in particular, allow for visual checks.
1. Use a damp cloth to carefully remove dust and dirt deposits from all surfaces of the compo-
nents.
2. Report any corrosion damage and/or coating stuck on the component surfaces to the Autho-
rized Distributor.
Operator's Manual | Oxeo PR LCP | F_101821 Rev 02 | 08-2022 | en
Cleaning
89
Advertisement
Table of Contents
