Table of Contents
Advertisement
Design and Function
FIGURE 4-29: Pneumatically operated limit switch (part no. 826758D)
1. Pneumatically operated limit switch
2. Push button (for testing)
This allows signals that can be used for various purposes to be triggered via the limit switch if it is
electrically connected to the fire detection and extinguishing control panel. For instance, they can
also be used to alert the fire department.
An additional push button allows you to trigger the electrical signal for test purposes.
Operator's Manual | Oxeo PR LCP | F_101821 Rev 02 | 08-2022 | en
59
Advertisement
Table of Contents
