Table of Contents
Advertisement
2.11 Signage
The following symbols and information signs have been attached in the area of the system.
WARNING Risk from illegible or missing signs.
Over time, stickers and signs can become dirty or illegible for other reasons, so that risks
can no longer be recognized and necessary operating instructions can no longer be
adhered to. This will lead to risk of injury.
• Keep all safety, warning and operating instructions easily legible at all times.
• Immediately replace damaged signs or stickers.
Marking of the extinguishing zones
The operator must mark the extinguishing zones of the system to point out the presence of the
fire extinguishing system and the involved risks.
Signs for both Nitrogen and Argon systems are available (Nitrogen pictured below). Signs are
available in English, Spanish, and French.
This area is protected by a Viking Nitrogen
fire suppression system.
In the event of a FIRE and system
discharge, CAUTION must be taken to
avoid exposure to products of combustion.
DO NOT enter without an approved
self-contained breathing apparatus or until
area is thoroughly ventilated. System must
be disabled during maintenance.
NITROGEN
IG-100
FIGURE 2-1: System labeling
Operator's Manual | Oxeo PR LCP | F_101821 Rev 02 | 08-2022 | en
This area is protected by a Viking Nitrogen
fire suppression system.
When the fire alarm sounds, or in the event
of a FIRE and system discharge,
EVACUATE hazard area immediately and
DO NOT re-enter until area is thoroughly
ventilated.
System must be disabled during
maintenance.
210 N. INDUSTRIAL PARK DR.
HASTINGS, MI 49058, USA
ITROGEN
IG-100
PN 24587
210 N. INDUSTRIAL PARK DR.
HASTINGS, MI 49058, USA
PN 24588
Safety
23
Advertisement
Table of Contents
