Service And Maintenance; Error And Diagnostics Messages; Message Types - Siemens SIMATIC MV550 S Operating Instructions Manual

Service and maintenance

10.1

Error and diagnostics messages

If there are operator errors or errors in processing mode, the optical reader outputs
diagnostic information. The diagnostic information can be read out as follows:
● As a message via the WBM.
● Via the LED display on the reader.
● When using onboard PROFINET and FB 79 or Ident profile, in the device diagnostics.
● When using the Ident profile, in the diagnostics.
10.1.1

Message types

For the messages, a distinction is made between the following message types:
● Error messages
● Warnings/notes
● Read results
All three message types are displayed in the WBM.
Most messages of the "error message" type trigger a diagnostic interrupt on the relevant
PROFINET controller.
The following sections "Error messages" and "Error output of read results" describe all
messages, their meaning and the corresponding corrective measures.
SIMATIC MV500
Operating Instructions, 05/2019, C79000-G8976-C494-02
10
175