Table of Contents
Advertisement
Cleaning
It may be necessary to perform more or less frequent cleaning, depending on the operating environment and usage.
To clean the coin recycler's return cup
1
If necessary, wait until a transaction has been fin-
ished,
switch the pay station off
it from power.
2
Gain access to the coin recycler
3
Use a cleaning tissue to remove all dust or debris
from the coin recycler's return cup and allow to dry.
4
Close the Paypod™ pay station
5
Reconnect the pay station and
46
.
6.5
Emptying the Coin Recycler's Dust Tray
How often?
What
cleaning agents
What other tools do I need?
To assure that no foreign objects reach the coin path the coin input funnel has holes allowing foreign particles to fall in
the dust tray. To clean the dust tray
98
The following cleaning instructions show the
Disconnect the pay station from the main power before cleaning it.
·
Moisten cloths only slightly to prevent fluid from entering the device. This would damage the
·
electronic boards and optics.
Only use the recommended cleaning agent/tools and do not use solvents or scouring agents
·
that could affect the plastic and optics of the device.
46
and disconnect
53
.
55
again.
switch it on again
96
do I need?
Paypod™ Embedded Pay Station
parts to be cleaned
46
Cleaning Coin Recycler's Return Cup
As needed, at least every six
months, indicated in POSlinq™
middleware
Compressed air
·
Slightly moistened cleaning tis-
·
sues
Disposable gloves
·
Pay station key
·
Key for coin recycler lid
·
If necessary, cloth to cover
·
bottom units
Published by CPI
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
in blue.
Advertisement
Table of Contents
