Table of Contents
Advertisement
Paypod™ Embedded Pay Station
B
bottom side of the acceptance unit [3] to be accessed from the bottom through the cash box chamber
C
inner part of spine [4] towards the bottom.
D
outer (flap) part of the spine [5] also towards the bottom.
7
Close the lower rear flap again [E].
8
Open the cash box cassette and empty it
Now the cassette may be reinstalled.
9
Reinstall the cash box
pay station
again.
6.11
Cleaning Chassis Interior
How often?
What
cleaning agents
What other tools do I need?
To clean the chassis interior
1
If necessary, wait until a transaction has been finished,
power.
2
Open the Paypod™ pay station and its payment component cart
3
Use a vacuum cleaner to remove all dust or debris from the inside of the pay station chassis.
4
Close the Paypod™ pay station
5
Reconnect the pay station and
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
66
66
,
close the Paypod™
55
, reconnect it and
switch it on
96
do I need?
The following cleaning instructions show the
55
again.
switch it on again
Published by CPI
91
.
46
Closing E23/E24 Banknote Recycler's Lower Rear Flap
As needed, at least every month
Hoover/vacuum cleaner
Pay station key
parts to be cleaned
switch the pay station off
53
.
46
.
Cleaning
in blue.
46
and disconnect it from
111
Advertisement
Table of Contents
