Table of Contents
Advertisement
Cleaning
Cleaning (Banknote Path Covers') Light Pipes in E22 Banknote Transporting Unit
5
Use two fingers to pinch the yellow tabs of the up-
per [1] [B] and then of the lower banknote path
cover [2] inward [C] and
6
simultaneously rotate the covers [3] up [B] [C].
7
Use compressed air to blow any dust or debris from
both, the light pipes on the note path covers [4] and
on the transporting unit [5] [D].
8
Close both covers [E] and let them fully latch by
pinching the tabs again.
The cover axles mate with the housing on both
sides [6].
9
Close transporting unit
Paypod™ pay station
46
on
again.
104
64
again, then
close the
55
, reconnect it and
switch it
Published by CPI
Paypod™ Embedded Pay Station
Closing E22 Banknote Transporting Unit's Banknote Path Covers
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Advertisement
Table of Contents
