Removing And Reinstalling The E22 Banknote Cash Box - CPI PAYPOD Embedded User Manual

Operation
Opening E22 Banknote Transporting Unit
To reinstall the transporting unit
7
Rotate the unit back in a perpendicular position [C].
8
Then push the unit till it clicks into place [D]. If necessary, grasp both sides of the yellow cover and push it down
till it clicks in place.
9
Reinstall the vault
The transporting unit will automatically perform a full reset.
10
Close the Paypod™ pay station
4.10.4 Removing and Reinstalling the E22 Banknote Cash Box
The cash box can be removed using the interlock key.
To remove the banknote cash box cassette
1
If necessary, wait until a transaction has been finished.
2
Gain access to the banknote recycler
3
Insert the key in the lock.
4
Simultaneously push the key and turn it counter-clockwise as far as it will go.
5
Use the yellow handle [1] to pull the cash box cassette out of the chassis [A].
6
Continue with
64
63
.
55
again.
Older E22 Paypod™ pay stations may have no interlock.
53
86
emptying , cleaning the unit
Paypod™ Embedded Pay Station
Closing E22 Banknote Transporting Unit
.
105
or clearing a banknote jam
Published by CPI 44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
121
.