Table of Contents
Advertisement
Cleaning
10
Reconnect the pay station and
6.6
Cleaning the E22 Banknote Acceptance Unit
How often?
What
cleaning agents
What other tools do I need?
To clean the banknote acceptance unit
1
If necessary, wait until a transaction has been finished,
power.
2
Gain access to the banknote recycler
3
Remove the E22 banknote acceptance unit
4
Hold the unit in one hand, use the other hand to slide the yellow top latch [1] to the front (pull) as far as it will
go [A], hold it and
5
simultaneously unfold the unit's top portion [2] [A].
6
Use compressed air to blow any dust or debris from the light pipes and recognition sensors [3] on the top and
bottom part of the acceptance unit [B].
Unfolding E22 Banknote Acceptance Unit
100
switch it on again
96
do I need?
The following cleaning instructions show the
53
Paypod™ Embedded Pay Station
46
.
As needed, at least every six
months/60,000 cycles, indicated
in POSlinq™ middleware
Compressed air
Disposable gloves
·
Pay station key
·
parts to be cleaned
switch the pay station off
.
61
.
Cleaning E22 Banknote Acceptance Unit
Published by CPI
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
in blue.
46
and disconnect it from
Advertisement
Table of Contents
