Removing And Reinstalling Banknote Recycler Units - CPI PAYPOD Embedded User Manual

Operation
To close the payout unit again
1
Close the coin recycler again [A].
The coin recycler will automatically perform a full reset.
2
Turn the key clockwise as far as it will go [B], pull it out
of the lock and store it in a safe place.
3
Close the Paypod™ pay station
4.10 Removing and Reinstalling Banknote recycling units
Read here how to remove a banknote recycler unit for maintenance purposes for instance. Depending on the
pay station version
evant instructions:
Removing and reinstalling the E22 banknote acceptance unit
·
Removing and reinstalling the E22 banknote vault
·
Opening and closing the E22 banknote transporting unit
·
Removing and reinstalling the E22 banknote cash box
·
Removing and reinstalling the E23/E24 banknote cash box
·
60
Do not unlock the lid and press the push-
button to open the lid when the payout
unit is open. This unlatches the coin ac-
ceptance unit and may damage the
device or result in injuries.
55
again.
10
you have, the pay station is equipped with a certain banknote recycler. Please refer to the rel-
Paypod™ Embedded Pay Station
Closing Coin Recycler's Payout Unit
61
62
63
64
65
Published by CPI 44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Coin Recycler's Payout Unit Open
Paypod™