Operation; Switching The Paypod™ Pay Station On And Off - CPI PAYPOD Embedded User Manual

Operation

4 Operation
4.1 Switching the Paypod™ Pay Station On and Off
The Paypod™ pay station is switched on and off with the power switch [1] on the left-hand side of the chassis:
1
Turn the on-off switch to the ON position [A].
If correctly connected to power, the pay station powers up.
The coin input LED [2] flashes white (often seems to be blue)
·
After the top LEDs flashed red all E23/E24 banknote bezel LEDs [3] flash green
·
The E22 banknote bezel LEDs [4] are off
·
The pay station is ready to be initialized by the POS system.
46
Read here how to operate the pay station:
Switching the Paypod™ pay station on and off
·
Starting POS software and log on/off POSlinq™ middleware
·
Checking the Paypod™ pay station status
·
50
Processing a transaction
·
52
Opening the main screen
·
52
Viewing cash stocks
·
Opening and closing the Paypod™ pay station
·
Easily accessing the payment components
·
Opening and closing the coin recycler
·
Removing and reinstalling banknote recycling units
·
Paypod™ Embedded Pay Station
46
49
53
56
56
60
Published by CPI 44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
47