Table of Contents
Advertisement
Paypod™ Embedded Pay Station
Removing E22 Banknote Cash Box
To reinstall the banknote cash box cassette
7
Reinsert the cash box cassette with its arrow facing to the top [2] and firmly push it until it clicks into place [B].
The cash box will automatically perform a test routine of the stacker motor.
8
Turn key clockwise as far as it will go to its perpendicular position, pull it out of the lock and store it in a safe
place.
9
Close the Paypod™ pay station
4.10.5
Removing and Reinstalling the E23/E24 Banknote Cash Box
The banknote cash box is secured in place within the banknote recycler (interlock system).
To remove the banknote cash box cassette
1
If necessary, wait until a transaction has been finished.
2
Gain access to the banknote recycler
3
Insert the key [1] in the lock, push and simultaneously turn it clockwise as far as it will go [A].
All four bezel LEDs start flashing green.
4
Push the yellow interlock system lever [2] to the rear [B].
The lever shows its red marking. The cash box and all other banknote units are no longer secured in place.
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
55
again.
The cash box may only be reinserted in empty condition!
Before removing the cash box, please make sure, that you have access to either the
key of the cash box you want to remove or another empty cash box for replacement
purposes.
Please read here to empty the cash box
53
Published by CPI
Reinserting E22 Banknote Cash Box
89
.
.
Operation
65
Advertisement
Table of Contents
