CPI PAYPOD Embedded User Manual page 66

Pay station
Hide thumbs Also See for PAYPOD Embedded:
Table of Contents

Advertisement

Operation
5
Unfold [C] the yellow cash box handle [3] and pull the cash box out of the chassis [D], if necessary, bring the
handle back into its initial position.
6
Empty the unit
Unlocking E23/E24 Banknote Interlock System
To reinstall the empty banknote cash box cassette
1
Reinsert the cassette until it locks in place [A].
2
Push the yellow interlock system lever [1] back to
the front [B].
3
Turn the interlock system key [2] counter-clock-
wise [C], pull it out of the lock [D] and also store it
in a safe place.
The banknote recycling units are locked in place.
4
Close the Paypod™ pay station
5
Switch pay station off and on
banknote recycler.
66
89
or
reinstall an empty cash box
It should be easy to insert the cash box
with only little force!
If you are not able to click the cash box
into place, please ensure that the LED
indicator above the lock is green (cp.
Emptying the E23/E24 cash box
and the yellow interlock system lever
shows its red marking (see above).
55
again.
46
again to reset the
Paypod™ Embedded Pay Station
66
.
Removing E23/E24 Banknote Cash Box
91
)
Reinserting E23/E24 Banknote Cash Box and Locking Interlock System
Published by CPI
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf

Advertisement

Table of Contents
loading

Related Products for CPI PAYPOD Embedded

Table of Contents