Table of Contents
Advertisement
Paypod™ Embedded Pay Station
4
Confirm number with Validate [D].
The numeric pad jumps to the next coin's/banknote's Quantity field or closes.
5
Select End [E] to dispense the notes.
Depending on the number of banknotes to be dispensed the E23/E24 recycler collects up to 15 banknotes to
dispense them in a bundle. This can take a few minutes. The E23/E24 return LEDs [4] are then flashing green
indicating that the note bundle will be dispensed.
The E22 recycler dispenses single banknotes one after another, a note needs to be collected before the next will
be dispensed.
6
Collect banknotes [F] until all banknotes have been dispensed.
All coin counters involved have been decreased accordingly. The middleware returns to the administration
screen.
7
Tap the X button to close screen [G].
The pay station is back in operating mode and ready for the next transaction.
The administrator receives a status e-mail giving details such as:
POSlinq™ middleware float down report type
·
Terminal ID
·
Emptying details, coins dispensed
·
Alert report of recycling units' levels
·
Paypod™ pay station inventory
·
User ID
·
POSlinq™ middleware version
·
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Collecting Banknotes Dispensed
This confirmation e-mail lists different parameters and numbers depending on the customized con-
figuration. It is also possible to configure various e-mails containing different details to be sent to dif-
ferent addresses.
Published by CPI
Handling Cash
Closing Administration Screen
85
Advertisement
Table of Contents
