Opening And Closing The Coin Recycler's Acceptance Unit - CPI PAYPOD Embedded User Manual

Operation
4.9.2

Opening and Closing the Coin Recycler's Acceptance Unit

The coin acceptance unit consists of an upper and a lower layer. The upper layer can be opened using a bayonet
mount to eliminate a jam for instance. The bayonet mount indication is green when it is properly closed. To disconnect
the mount:
1
Open the coin recycler lid
2
Carefully lift the arm [1] of the coin validator [A].
3
Press the green lever [2] of the bayonet mount.
4
Keep the lever pressed and turn bayonet mount ring
counter-clockwise as far as it will go [B].
The bayonet mount indication is no longer green but
red [3].
5
Open up upper acceptance unit as far as it will
go [C].
58
Unlocking Coin Recycler's Acceptance Unit
56
.
Published by CPI
Paypod™ Embedded Pay Station
Opening Coin Recycler's Acceptance Unit
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf