Using A Soft Key To Activate A Feature; Assigning A Feature To A Soft Key; Carrier Voip; Nortel Ip Phone 2001 User Guide (Cicm - Nortel IP Phone 2001 User Manual

36 Using the Call Services menu
5

Using a soft key to activate a feature

Follow this procedure to activate a feature that is assigned to a soft key.
Prerequisites
You must be logged on.
Procedure Steps
Step
1

Assigning a feature to a soft key

An assigned feature appears in the display except when the terminal is in
the state specified by the profile: Hide when idle or Hide when active.
If a feature is already assigned to the selected soft key, a message prompt
appears to ask if you want to replace the current assignment.
Prerequisites
You must be logged on.
Procedure Steps
Step
1
2
3
4
Copyright © 2008 Nortel Networks
.
Press Ok.
The feature is activated. A text description appears in the display
identifying the active feature, Forwarded, for example.
An asterisk (*) appears next to the item in the menu, to indicate
that the feature is active.
Action
Press the soft key associated with the feature you want to use.
The feature is activated. A down arrow icon appears next to the
item to indicate that the feature is active.
Action
From the main menu, open the Call Services menu.
From the Call Services menu, select the feature you want to
assign to a soft key.
From the Call Services menu, select Change Softkey.
Press Ok.
The Select Key screen appears.

Carrier VoIP

Nortel IP Phone 2001 User Guide (CICM)

NN10300-005 09.01 Standard
4 July 2008
--End--
--End--