Availability Of Miele Digital Products; Wi-Fi / Lan; Network Time - Miele PDR 914 Operating And Installation Instructions

Supervisor level
- Internal module (factory default)
The internal Wi-Fi module is used.
- External module
An XKM module or RS232 module is inserted into the module slot.

Availability of Miele digital products

The ability of Miele digital products depends on the availability of the services in your
country.
The different services are not available in all countries.
For information about availability, please visit www.miele.com.

Wi-Fi / LAN

Control the networking of your tumble dryer.
- Setup
This message only appears if the tumble dryer has not yet been connected to a Wi-Fi
network.
- Deactivate (visible when the network is activated)
The network remains set up; the Wi-Fi function is switched off.
- Activate (visible when the network is deactivated)
The Wi-Fi function is reactivated.
- Connection status (visible when the network is activated)
The following values are displayed:
– the quality of Wi-Fi reception
– the network name
– the IP address
- Reset (visible if set up)
Resets the Wi-Fi login (network) to immediately re-establish a new connection.
- Reset (visible if set up)
The network is no longer set up. To use the network again, a new connection must be
established.
– The Wi-Fi is switched off.
– The Wi-Fi connection will be reset to the factory default setting.

Network time

The date and time can be synchronised via the network.
- Off
The date and time are not synchronised via the network.
- as a master
The machines are in a network but are not connected to the internet. One machine is
declared as the master and sends data to the slave devices.
- as a slave
50