Before Using For The First Time; Installation; Downtime After Installation; Information About Networking - Miele TWL 780 WP Operating Instructions Manual

Before using for the first time

Installation

Before using the appliance for the
first time, check that you have
followed all the instructions under
"Installation".
Read these operating instructions,
paying particular attention to the
information provided under
"Installation".
Removing the protective foil and
advertising stickers
 Remove:
- the protective foil from the door (if
present).
- any advertising stickers from the front
and the lid.
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.

Downtime after installation


Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
switching it on.
22

Information about networking

Miele@home

Your tumble dryer is equipped with an
integrated Wi-Fi module.
In order to use it you need:
- a Wi-Fi network
- the Miele App
- a Miele user account. The user
account can be created via the Miele
App.
The Miele App will guide you as you
connect your tumble dryer to your
home Wi-Fi network.
Once your tumble dryer is connected to
your Wi-Fi network, you can use the
App, for example, to carry out the
following activities:
- Operate the tumble dryer remotely
- Call up information on the operating
status of your appliance
- Call up information on the
programme sequence of your tumble
dryer
Connecting your tumble dryer to your
Wi-Fi network will increase energy
consumption, even when the tumble
dryer is switched off.
Before installing the tumble dryer in
its final location, ensure the signal
strength of your Wi-Fi network is
sufficient.